Edgings: crocheted, tatted, hair pin lace
Author: Unknown
Date: 2020-06-26T00:00:00+00:00
Keywords: Crocheting -- Patterns; Tatting -- Patterns; Hairpin lace -- Patterns

The Project Gutenberg eBook of Edgings: crocheted, tatted, hair pin lace

This ebook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this ebook or online at www.gutenberg.org. If you are not located in the United States, you will have to check the laws of the country where you are located before using this eBook.

Title: Edgings: crocheted, tatted, hair pin lace

Creator: American Thread Company

Release date: June 26, 2020 [eBook #62485]
Most recently updated: October 18, 2024

Language: English

Credits: Produced by Stephen Hutcheson and the Online Distributed
Proofreading Team at https://www.pgdp.net

*** START OF THE PROJECT GUTENBERG EBOOK EDGINGS: CROCHETED, TATTED, HAIR PIN LACE ***

Star Book No. 81 10 CENTS.

Edgings

Crocheted·Tatted·Hair Pin Lace

AMERICAN THREAD COMPANY
260 W. Broadway, New York 13, N. Y.
Copyright 1951 Printed in U. S. A.

See Pg. 2 for instructions on above Edgings

2

Tatted Motif and Edging #810

Illustrated on front cover

Materials Required: AMERICAN THREAD COMPANY

“STAR” TATTING CROCHET, Article 25

2 balls Tinted Pink and Yellow or any color desired

1 Shuttle

1 Handkerchief

MOTIF: R, 3 d, 4 p sep by 3 d, 3 d, cl r. R, 3 d, join to last p of last r made, 3 d, 4 p sep by 3 d, 3 d, cl r. R, 3 d, join to last p of last r made, 3 d, 3 p sep by 3 d, 3 d, cl r (clover), turn. Ch, 6 d, small p, 3 d, small p, 6 d, turn. * R, 3 d, p, 3 d, join to center free p of last r made, 3 d, 2 p sep by 3 d, 3 d, cl r. R, 3 d, join to last p of last r made, 3 d, 4 p sep by 3 d, 3 d, cl r. R, 3 d, join to last p of last r made, 3 d, 3 p sep by 3 d, 3 d, cl r, turn. Ch, 6 d, join to last p of previous ch, 3 d, small p, 6 d, turn. Repeat from * twice joining the last r to 1st r made and joining the ch at corresponding picots, tie and cut.

2nd Row—R, 4 d, 4 p sep by 4 d, 4 d, cl r, * turn. Ch, 6 d, turn. R, 4 d, p, 4 d, join to last p of last r made, 4 d, 2 p sep by 4 d, 4 d, cl r. R, 4 d, join to last p of last r made, 4 d, 4 p sep by 4 d, 4 d, cl r. R, 4 d, join to last p of last r made, 4 d, 3 p sep by 4 d, 4 d, cl r, turn. Ch, 6 d, turn. R, 4 d, join to center free p of last r made, 4 d, 3 p sep by 4 d, 4 d, cl r, turn. Ch, 6 d, p, 6 d, join to p of 1st r of clover of 1st row, 6 d, join to 1st p of next r of same clover of 1st row, 6 d, p, 3 d, turn. R, 4 d, p, 4 d, join to center free p of last r made, 4 d, 2 p sep by 4 d, 4 d, cl r. R, 4 d, join to last p of last r made, 3 d, 4 p sep by 3 d, 4 d, cl r. R, 4 d, join to last p of last r made, 4 d, 3 p sep by 4 d, 4 d, cl r, turn. Ch, 3 d, join to last p of last ch, 6 d, skip 1 p of same r of 1st row, join in next p, 6 d, join to next p of next r of same clover, 6 d, p, 6 d, turn. R, 4 d, p, 4 d, join to center free p of last r made, 4 d, 2 p sep by 4 d, 4 d, cl r. Repeat from * twice, turn. Ch, 6 d, turn. R, 4 d, p, 4 d, join to last p of last r made, 4 d, 2 p sep by 4 d, 4 d, cl r. R, 4 d, join to last p of last r made, 4 d, 4 p sep by 4 d, 4 d, cl r. R, 4 d, join to last p of last r made, 4 d, 3 p sep by 4 d 4 d, cl r, turn. Ch, 6 d, turn. R, 4 d, join to center free p of last r made, 4 d, 3 p sep by 4 d, 4 d, cl r, turn. Ch, 6 d, join to opposite p of last ch, 6 d, join to next p of next r of 1st row, 6 d, join to next p of next r of same clover of 1st row, 6 d, p, 3 d, turn. R, 4 d, p, 4 d, join to center free p of last r made, 4 d, 2 p sep by 4 d, 4 d, cl r. R, 4 d, join to last p of last r made, 3 d, 4 p sep by 3 d, 4 d, cl r. R, 4 d, join to last p of last r made, 4 d, p, 4 d, join to center free p of 1st r made, 4 d, p, 4 d, cl r, turn. Ch, 3 d, join to opposite p of last ch, 6 d, skip 1 p, join in next p of same r of same clover, 6 d, join to next p of next r of same clover, 6 d, join to p of opposite ch, 6 d, tie and cut.

Work 3 more motifs in same manner. Sew one motif in each corner of handkerchief leaving the clover extend over edge of handkerchief. Cut away extra material from underneath motif.

EDGE: R, 3 d, 3 p sep by 3 d, 3 d, cl r. R, 3 d, join to last p of last r, 3 d, 4 p sep by 3 d, 3 d, cl r. R, 3 d, join to last p of last r, 3 d, 2 p sep by 3 d, 3 d, cl r, turn. Ch, 3 d, p, 6 d, p, 2 d, p, 6 d, p, 3 d, turn. * R, 3 d, p, 3 d, join to center p of last r, 3 d, p, 3 d, cl r. R, 3 d, join to last p of last r, 3 d, 4 p sep by 3 d, 3 d, cl r. R, 3 d, join to last p of last r, 3 d, 2 p sep by 3 d, 3 d, cl r, turn. Ch, 3 d, join to last p of last ch, 6 d, p, 2 d, p, 6 d, p, 3 d, turn. Repeat from * until strip is long enough to fit across side between corner motifs. Work 3 more strips in same manner and sew on each side of handkerchief between the corner motifs.

Flower Edging #811

Illustrated on front cover

Materials Required: AMERICAN THREAD COMPANY

“STAR” TATTING CROCHET, Article 25
1 ball each Yellow and Nile Green
Assorted Colors

1 Handkerchief

Steel crochet hook No. 13

1st FLOWER: With Yellow ch 5, join to form a ring, ch 1 and work 10 s c in ring, join in 1st s c, cut thread.

2nd Row—Attach Color in any s c, s c in same space, * ch 5, s c in next s c, repeat from * all around ending row with ch 5, join in 1st s c, cut thread.

2nd FLOWER: Work 1st row same as 1st flower.

2nd Row—Attach Color, s c in same space, ch 2, join to center st of any loop of 1st flower (to join: sl loop off hook, insert in st, pull loop through), ch 2, s c in next s c of 2nd flower, ch 2, join to next free loop of 1st flower, ch 2, s c in next s c of 2nd flower, work remainder of flower same as 1st flower. Work as many flowers as needed for each side of handkerchief joining in same manner leaving 3 petals free on upper and lower edge between joinings. Leave 6 petals free on outer edge of each corner flower.

FINISHING: Attach Green in corner space of handkerchief, ch 1 and work 3 s c in same space, ** ch 1, s c in next space, join to center st of center loop at lower edge of 1st free flower after corner flower, * ch 1, s c in next space, repeat from * for about ½ inch, join to center loop of next flower, repeat from 1st * to last flower before corner flower (ending in space before corner space), ch 1, 3 s c in corner space, repeat from ** all around ending row to correspond, join, cut thread.

Narrow Hairpin Lace Edging #812

Illustrated on front cover

Materials Required: AMERICAN THREAD COMPANY

“STAR” TATTING CROCHET, Article 25

1 ball Tinted Lavender and Yellow or any color desired.

1 Handkerchief

Steel crochet hook No. 13

Hairpin Staple ¼ inch wide

HAIRPIN LACE: Make a loop at end of thread, insert hook in loop and wind thread around right prong of hairpin staple, thread over hook and draw through loop keeping loop at center, * drop loop from hook, turn staple ½ turn to the left, pick up the dropped loop at center, thread over hook and pull through loop, insert hook through top part of loop on left hand prong, thread over and pull through (2 loops on hook), thread over and pull through both loops completing the single crochet, repeat from * until lace is long enough to reach around entire handkerchief. When staple is filled, slip loops off staple always keeping 4 or 5 loops on so lace will not get twisted.

Sew around handkerchief as illustrated allowing a little fullness at each corner.

EDGE: Attach thread in any loop of hairpin lace, * ch 3, s d c in 3rd st from hook (s d c: thread over hook, insert in st, pull through, thread over and pull through all loops at one time), sl st in next loop, repeat from * all around, join, cut thread.

Crocheted Edging #813

Illustrated on page 3

Materials Required: AMERICAN THREAD COMPANY

“STAR” TATTING CROCHET, Article 25
3 balls White or color desired
1—11 inch Handkerchief

Steel crochet hook No. 13

Attach thread in corner, ch 6, d c in same space, ch 10, 2 d c with ch 3 between in same space, * ch 10, skip about ⅝ inch space, 2 d c with ch 3 between in next space (shell), repeat from * 19 times ending in corner st, ch 10, shell in same space (corner), continue working all around in same manner having 20-ch 10 loops on each side and 1 loop in each corner space, ch 10, join in 3rd st of ch.

2nd Row—Sl st to center of shell, ch 7, tr c in same space, ** ch 3, s c in corner loop, * ch 3, s c in same loop, repeat from * once, ch 3, 1 tr c, ch 3, 1 tr c in next shell, * ch 3, s c in next loop, ch 3, s c in same loop, ch 3, s c in same loop, ch 3, shell in shell, repeat from * to 2nd shell before corner, ch 3, s c in next loop, * ch 3, s c in same loop, repeat from * once, ch 3, 1 tr c, ch 3, 1 tr c in next shell, repeat from ** all around in same manner ending row to correspond, join in 4th st of ch.

3rd Row—Sl st into loop, ch 7, tr c in same space, ** ch 3, skip 1 loop, s c in next loop, ch 3, s c in next loop, ch 3, skip 1 loop, 1 tr c, ch 3, 1 tr c in next loop, * ch 3, skip 1 loop, s c in next loop, ch 3, s c in next loop, ch 3, shell 3 in next shell, repeat from * to last shell before corner group, ch 3, skip 1 loop, s c in next loop, ch 3, s c in next loop, ch 3, skip 1 loop, l tr c, ch 3, 1 tr c in next loop, repeat from ** all around in same manner ending row to correspond, join in 4th st of ch.

4th Row—Sl st into loop, ch 4 (counts as 1 tr c), 2 tr c in same loop, ** ch 5, 3 tr c in same loop, * ch 3, skip 1 loop, 3 tr c, ch 5, 3 tr c in next loop, repeat from * once, ch 3, skip 1 loop, s c in next loop, * ch 6, s c in next shell, ch 6, skip 1 loop, s c in next loop, ch 3, 3 tr c, ch 5, 3 tr c in next shell, ch 3, skip 1 loop, s c in next loop, ch 3, 3 tr c, ch 5, 3 tr c in next shell, ch 3, skip 1 loop, s c in next loop, repeat from * 5 times, ch 6, s c in next shell, ch 6, skip 1 loop, s c in next loop, ch 3, 3 tr c in next shell, repeat from ** all around in same manner, join in 4th st of ch.

5th Row—Ch 4 (counts as 1 tr c), 1 tr c in each of the next 2 tr c, ch 5, s c in next loop, ch 5, * thread over hook twice, insert in next tr c, thread over and work off 2 loops twice, repeat from * 5 times, thread over and work off all loops at one time (6 tr c cluster st), ch 5, 3 tr c, ch 5, 3 tr c in next loop, ch 5, cluster st over the next 6 tr c, ch 5, s c in next loop, ch 5, 1 tr c in each of the next 3 tr c, * ch 3, skip 1 loop, s c in next loop, ch 3, s c in next loop, ch 3, 1 tr c in each of the next 3 tr c, ch 7, s c in next loop, ch 7, cluster st over the next 6 tr c, ch 7, s c in next loop, ch 7, 1 tr c in each of the next 3 tr c, repeat from * 5 times, ch 3, skip 1 loop, s c in next loop, ch 3, s c in next loop, ch 3, repeat from beginning all around in same manner, join in 4th st of ch.

6th Row—Ch 4, 1 tr c in each of the next 2 tr c leaving the last loop of each st on hook, thread over and pull through all loops at one time, * ch 8, s c in next loop, repeat from * twice, ch 5, 1 tr c in each of the next 3 tr c, ch 5, s c in next loop, ch 5, 1 tr c in each of the next 3 tr c, ch 5, s c in next loop, * ch 8, s c in next loop, repeat from * once, ** ch 8, cluster st over next 6 tr c, * ch 8, s c in next loop, repeat from * 3 times, repeat from ** 5 times, ch 8, cluster st over the next 6 tr c, repeat from 1st * all around ending row with ch 8, 3 tr c cluster st in last 3 tr c group, join to 1st cluster st.

7th Row—Ch 3, sl st in top of cluster st for picot, ch 3, s c in next loop, ch 3, sl st in s c for picot, * ch 7, s c in next loop, repeat from * once, ch 3 picot, ch 6, 3 tr c cluster st over next 3 tr c group, ch 3 picot, ch 6, s c in next loop, ch 7, sl st in 3rd st from hook for picot, ch 3, s c in next loop, ch 6, 3 tr c cluster st over next 3 tr c group, ch 3 picot, ch 6, skip 1 loop, s c in next loop, ch 3 picot, * ch 7, s c in next loop, repeat from * once, ** ch 3 picot, ch 3, sl st in top of next cluster st, ch 3 picot, ch 3, s c in next loop, ch 3 picot, ch 6, s c in next loop, ch 6, tr c in next loop, ch 5, sl st in 4th st from hook for picot, ch 1, tr c in same space, * ch 6, s c in next loop, repeat from * once, repeat from ** 5 times, ch 3 picot, ch 3, sl st in top of next cluster st, repeat from beginning all around, cut thread.

Center Edging & Corner #815 above.
Instructions on Page 14.

Tatted Round Motif and Edging #814

Illustrated above

Materials Required:

AMERICAN THREAD COMPANY “STAR” TATTING CROCHET, Article 25

2 balls White or any color desired

1 Handkerchief

1 Shuttle

CENTER: R, 2 d, 8 p sep by 3 d, 1 d, cl r, tie and cut.

1st Row—Using ball and shuttle R, 3 d, p, 3 d, join to p of center, 3 d, p, 3 d, cl r, turn. * Ch, 4 d, 3 p sep by 4 d, 4 d, turn. R, 3 d, join to last p of last r made, 3 d, join to next p of center, 3 d, p, 3 d, cl r, turn. Repeat from * 6 times, joining last r to 1st r. Ch, 4 d, 3 p sep by 4 d, 4 d, tie and cut.

2nd Row—1ST MOTIF: * R, 6 d, 5 p sep by 2 d, 6 d, cl r. R, 6 d, join to last p of last r, 2 d, 4 p sep by 2 d, 6 d, cl r. Repeat from * once, tie and cut.

2nd MOTIF: R, 6 d, 5 p sep by 2 d, 6 d, cl r. R, 6 d, join to last p of last r, 2 d, 2 p sep by 2 d, 2 d, join to center p of ch of 1st row, 2 d, p, 6 d, cl r. R, 6 d, p, 2 d, join to center p of next ch of 1st row, 2 d, join to 2nd free p from joining of last r of 1st motif, 2 d, p, 2 d, p, 6 d, cl r. R, 6 d, join to last p of last r, 2 d, 4 p sep by 2 d, 6 d, cl r, tie and cut.

Continuation from page 14

3rd MOTIF: R, 6 d, 2 p sep by 2 d, 2 d, join to 1st free p of lower r of last motif, 2 d, 2 p sep by 2 d, 6 d, cl r. R, 6 d, join to last p of last r, 2 d, 4 p sep by 2 d, 6 d, cl r. R, 6 d, 5 p sep by 2 d, 6 d, cl r. R, 6 d, join to last p of last r, 2 d, 4 p sep by 2 d, 6 d, cl r, tie and cut.

4th MOTIF: R, 6 d, 5 p sep by 2 d, 6 d, cl r. R, 6 d, join to last p of last r, 2 d, 2 p sep by 2 d, 2 d, skip 1 ch of 1st row, join in center p of next ch of 1st row, 2 d, p, 6 d, cl r. R, 6 d, p, 2 d, join to center p of skipped ch of 1st row, 2 d, join to 3rd free p of lower r of previous motif, 2 d, p, 2 d, p, 6 d, cl r. R, 6 d, join to last p of last r, 2 d, 4 p sep by 2 d, 6 d, cl r, tie and cut. Repeat the 3rd and 4th motifs twice joining last motif to 1st motif to correspond.

Work 3 more corners in same manner. Sew one in each corner of handkerchief as illustrated having the 3 full motifs extend over corner and half of motif extend on each side. Cut out extra material from underneath leaving about ⅛ inch to turn under.

EDGE: * R, 6 d, 5 p sep by 2 d, 6 d, cl r. R, 6 d, join to last p of last r, 2 d, 4 p sep by 2 d, 6 d, cl r. Repeat from * once, tie and cut.

2nd MOTIF: R, 6 d, 3 p sep by 2 d, 2 d, join to 4th free p of lower r of previous motif, 2 d, p, 6 d, cl r. R, 6 d, join to last p of last r, 2 d, 4 p sep by 2 d, 6 d, cl r. R, 6 d, 5 p sep by 2 d, 6 d, cl r. R, 6 d, join to last p of last r, 2 d, 4 p sep by 2 d, 6 d, cl r, tie and cut.

Repeat the 2nd motif until strip is long enough to fit between corners. Work 3 more strips in same manner and sew to each side of handkerchief between corners.

4

Gray Place Mats with Rose Border and Napkins #816

This set may be made with any of the AMERICAN THREAD COMPANY products listed below:

Material | Quantity | Size of Needle

“GEM” CROCHET COTTON Article 35, size 30

5 balls Shaded Pinks
4 balls Nile Green

steel 12

or

“STAR” CROCHET COTTON Article 20, size 30

6 balls Shaded Pinks
4 balls Nile Green

steel 12

or

“STAR” CROCHET COTTON Article 30, size 30

15 balls Shaded Pinks
10 balls Nile Green

steel 12

Finished mats measure 10 inches × 18¼ inches.

1½ yds. 35 inch Gray linen will make 4 place mats and 4 napkins.

Each flower measures 1¼ inches.

Inside of crocheted section should measure 10 inches × 16½ inches.

PLACE MAT—ROSE: With Shaded Pinks ch 5, join to form a ring, ch 5, d c in ring, * ch 2, d c in ring, repeat from * 5 times, ch 2, join in 3rd st of ch.

2nd Row—Ch 1 and over each loop work 1 s c, 4 d c, 1 s c, join.

3rd Row—* Ch 5, sl st in back of work between next 2 petals, repeat from * all around.

4th Row—Ch 1 and over each loop work 1 s c, 7 d c, 1 s c, join.

5th Row—* Ch 6, sl st in back of work between next 2 petals, repeat from * all around, cut thread.

6th Row—Attach Nile Green in loop and work 1 s c, 1 d c, 5 tr c, 1 d c, 1 s c in each loop, join, cut thread.

Work a 2nd flower joining it to 1st flower in last row as follows: attach Green in loop, 1 s c, 1 d c, 3 tr c in same space, join to center st of any Green petal of 1st flower (to join: drop loop off hook, insert in center st of petal, pick up loop and pull through), 2 tr c, 1 d c, 1 s c in same space, 1 s c, 1 d c, 3 tr c in next loop of 2nd flower, join to next petal of 1st flower, 2 tr c, 1 d c, 1 s c in same space of 2nd flower, finish row same as 1st flower. Work 13 more flowers joining in same manner leaving 2 petals free at top and 2 petals free at lower edge between joinings. Last flower made will be corner flower.

Work another flower same as previous flowers but leaving 4 petals free on outside edge of previous flower for corner when joining. Work 8 more flowers joining same as 1st side. Work another flower and join to last flower leaving 4 petals free on outside edge of last flower made for corner. Work 13 flowers joining same as 1st side. Work another flower and join to last flower leaving 4 petals free on outside edge of last flower for corner. Work 7 more flowers joining same as 1st side and joining last flower to 1st flower made leaving 4 petals free on outside edge of 1st flower for corner.

Cut linen ½ inch larger all around than inside edge, turn under a narrow hem and sew. Attach Nile Green at corner of linen, 3 s c in same space, ** 1 d c between the 2 petals of corner flower, 2 s c in same space on linen, working the s c about ¹/₁₆ inch apart work 2 s c on linen, 1 tr c in joining of corner flower and next flower to left of corner, 6 s c on linen, drop loop from hook, insert in center of 1st free petal of 1st flower to left of corner, pick up loop and pull through, 5 s c on linen, join to center of next petal of same flower, * 6 s c on linen, 1 tr c in joining of flowers, 6 s c on linen, join to center of 1st free petal of next flower, 5 s c on linen, join to next free petal of same flower, repeat from * to corner, 6 s c on linen, 1 tr c in joining of last flower and next corner flower, 2 s c on linen, 3 s c in corner of linen, repeat from ** all around, cut thread. Work other 3 mats in same manner.

Continuation from page 11

NAPKINS: Cut linen 12 x 12 inches. Turn under a very narrow hem and sew. With Nile Green work a row of s c around entire napkin working 5 s c in each corner, join, cut thread. Attach Shaded Pinks at corner, ch 3, d c in same space, ch 3, sl st in top of last d c for picot, d c in same space, * ch 3, skip 2 s c, s c in next s c, ch 3, skip 2 s c, 2 d c in next s c, ch 3, sl st in top of last d c for picot, d c in same space, repeat from * all around working the 2 d c, picot, 1 d c at each corner and ending row to correspond, join, cut thread. Work a rose same as on mat and applique to corner as illustrated.

5

Green Place Mats and Napkins #817

Materials Required:

AMERICAN THREAD COMPANY “GEM” CROCHET COTTON, Article 35, size 30

5 balls Shaded Lt. Yellows or color desired
or

“STAR” CROCHET COTTON, Article 30, size 30

14 balls Shaded Lt. Yellows or color desired

Each mat measures 12 inches x 18 inches finished.

Each napkin measures 12 inches x 12 inches finished.

Steel crochet hook No. 12

1½ yds. 35 inch Dark Green linen will make 4 place mats and 4 napkins.

MOTIF: Ch 5, join to form a ring, ch 5, d c in ring, * ch 2, d c in ring, repeat from * 5 times, ch 2, join in 3rd st of ch.

2nd Row—* Ch 1, 1 s c, ch 3, 1 s c over next loop, repeat from * all around, join.

3rd Row—Ch 3, d c in next ch 3 loop, ch 3, 5 d c over the d c just made, * d c in next ch 1 loop over the d c of previous row, d c in next ch 3 loop, ch 3, 5 d c over last d c made, repeat from * 6 times, join.

4th Row—Ch 8, * s c in 1st d c of next scallop, ch 5, skip 4 d c of same scallop, d c over next d c of previous row, ch 5, repeat from * all around ending row with s c in 1st d c of next scallop, ch 5, join in 3rd st of ch, cut thread.

Work a 2nd motif joining it to 1st motif in last row as follows: ch 8, s c in 1st d c of next scallop, ch 5, skip 4 d c of same scallop, d c in next d c of previous row, ch 2, join to corresponding loop of 1st motif, ch 2, s c in 1st d c of next scallop of 2nd motif, ch 2, join to next loop of 1st motif, ch 2, skip 4 d c of same scallop of 2nd motif, d c in next d c, finish row same as 1st motif, join, cut thread. Join all motifs in same manner having 6 loops free on each side of motif between joinings to corner. Leave 2 loops free at lower edge of corner motif when joining next side. Join all corner motifs in same manner and join last motif to 1st motif. 36 motifs are required for each mat having 12 motifs on each long side and 6 motifs on each short side between corners.

Inside Edge: Attach thread in 2nd free loop of motif to right of corner, * 3 s c in same loop, ch 2, 3 s c in next loop of same motif, repeat from * twice, ch 4, 1 tr c in next loop of same motif leaving last loop of tr c on hook, 1 tr c in each of the 2 free loops of corner motif leaving last loop of each tr c on hook, 1 tr c in 1st free loop of next motif to left of corner leaving last loop of tr c on hook, thread over and pull through all loops at one time (4 tr c cluster), ** ch 4, 3 s c in next loop, * ch 2, 3 s c in next loop of same motif, repeat from * twice, ch 4, tr c in next loop leaving last loop of tr c on hook, thread over hook twice, insert in 1st free loop of next motif, thread over and work off all loops 2 at a time (2 tr c cluster), repeat from ** all around working all corners same as 1st corner, joining last ch 4 to 1st s c.

Next Row—Sl st to next s c, ch 5, d c in next ch 2 loop, * ch 2, skip 1 sc, dc in next sc, ch 2, dc in next ch 2 loop, repeat from * once, ch 2, skip 1 s c, d c in next s c, cluster st in the 4 tr c cluster at corner (cluster st: 3 tr c in same space keeping last loop of each tr c on hook, thread over and pull through all loops at one time), ** skip 1 s c of next motif, d c in next s c, * ch 2, d c in next ch 2 loop, ch 2, skip 1 s c, d c in next s c, repeat from * twice, ch 2, d c in next loop, ch 2, d c in the 2 tr c cluster, ch 2, d c in next loop, ch 2, repeat from ** all around working all corners same as 1st corner and ending row to correspond, join, cut thread.

Continuation from page 11

Outside Edge: Attach thread in 1st free loop of motif to right of corner motif, ch 3, sl st in next loop, * ch 3, 2 d c in same space keeping last loop of each d c on hook, thread over and pull through all loops at one time (a 2 d c cluster st), ch 3, sl st in top of cluster st for picot, ch 3, sl st in same space with cluster st, ch 3, sl st in next loop, repeat from * 3 times, ch 3, sl st in 1st free loop of corner motif, ch 3, sl st in next loop of same motif, * ch 3, 2 d c cluster st in same space, picot, ch 3, sl st in same space, ch 3, sl st in next loop of same motif, repeat from * 7 times, ch 3, sl st in 1st free loop of next motif, ** ch 3, sl st in next loop, * ch 3, 2 d c cluster st in same space, picot, ch 3, sl st in same space, ch 3, sl st in next loop, repeat from * 3 times, ch 3, sl st in 1st free loop of next motif, repeat from ** all around working around all corner motifs same as 1st corner motif.

Cut linen 10 inches x 16 inches or ½ inch larger all around to fit inside of edging. Turn under ½ inch hem all around and hemstitch if preferred. Sew inner edge of edging to outside edge of place mat as illustrated.

Napkins: Ch 785, d c in 8th st from hook (corner), * ch 2, skip 2 sts of ch, d c in next st of ch, repeat from * 64 times, ch 5, d c in same space (2nd corner), repeat from 1st * all around working next 2 corners same as last corner and having 65 meshes on each side, not counting corner loops, joining last ch 2 in 3rd st of ch, do not cut thread. Cut linen 12 inches x 12 inches or ½ inch larger all around than inside of meshes just worked. Turn under ½ inch hem all around and sew or hemstitch if preferred. Sew edging around napkin matching corners.

2nd Row—sl st in corner loop, ** ch 3, 2 d c in same space keeping last loop of each d c on hook, thread over and pull through all loops at one time (a 2 d c cluster st), ch 3, sl st in top of cluster st for picot, ch 3, sl st in same space with cluster st, * ch 3, sl st in next mesh, repeat from * once, repeat from ** all around, join, cut thread.

6

Gray and Yellow Hairpin Lace Edging #818

Illustrated on center pages

Materials Required:

AMERICAN THREAD COMPANY “STAR” TATTING CROCHET, Article 25

1 ball Gray
2 balls Yellow or any color desired
1 Handkerchief 11 inches x 11 inches

Hairpin Staple ¾ inch wide

Steel crochet hook No. 13

See directions for hairpin lace given on page 2.

With Gray and leaving a small end work a length of hairpin lace to fit around handkerchief (560 loops on each side of staple), cut thread leaving an end, tie ends together being careful not to twist lace. Attach Yellow in 1st loop of hairpin lace and keeping the twist in each loop, ch 2, s d c in same space (s d c: thread over hook, insert in st, pull through, thread over and pull through all loops at one time), * ch 3, small puff st in next loop (small puff st: thread over hook, insert in loop, thread over and pull loop up about ⅛ inch, thread over hook, insert in same space, thread over and pull loop up the same length, thread over and pull through all 5 loops at one time), repeat from * 5 times, ** ch 3, small puff st through next 7 loops inserting hook through all 7 loops at one time, * ch 3, small puff st in next loop, repeat from * 6 times, repeat from ** across lace ending row with ch 3, small puff st through next 7 loops, ch 3, join in 1st puff st.

Sl st to center of 2nd loop, ch 7, d c in next loop, ch 4, ** tr c in next loop keeping the last loop of tr c on hook, skip 6 loops, tr c in next loop keeping the last loop of tr c on hook, thread over and pull through all loops at one time (corner), ch 4, d c in next loop, ch 4, d c in next loop, * ch 4, thread over hook twice, insert in next loop, pull loop through and work off 2 loops twice, thread over hook twice, skip 2 loops, insert hook in next loop, pull loop through, thread over and work off all loops 2 at a time, ch 4, d c in next loop, ch 4, d c in next loop, ch 4, d c in next loop, ch 4, d c in next loop, repeat from * 7 times, ch 4, tr c in next loop keeping last loop of tr c on hook, thread over hook twice, skip 2 loops, insert hook in next loop, pull loop through, thread over and work off all loops 2 at a time, ch 4, d c in next loop, ch 4, d c in next loop, ch 4, repeat from ** all around ending row to correspond and joining last ch 4 in 3rd st of ch 7, cut thread.

With Yellow crochet a row of s c around handkerchief working 3 s c in each corner. Sew hairpin lace around handkerchief sewing corners of lace to match corners of handkerchief.

OUTSIDE EDGE: Keeping the twist in the loops, attach Yellow through the 7 loops to right of 7 corner loops and work a small puff st through same 7 loops, ch 3, small puff st in next loop, ch 5 and work 1 small puff st in each of the next 6 loops with ch 5 between each puff st, * ch 3, small puff st through next 7 loops, ch 3, small puff st in each of the next 7 loops with ch 3 between each puff st, repeat from * all around working all corners same as 1st corner, ending row with ch 1, s d c in same st as beginning.

Next Row—Ch 3, d c in next loop, * ch 6, sl st in 3rd st from hook for picot, ch 3, small puff st in next loop, repeat from * 5 times, ch 6, sl st in 3rd st from hook for picot, ch 3, ** 1 d c in each of the next 2 loops keeping last loop of each d c on hook, thread over and pull through all loops at one time, * ch 5, sl st in 3rd st from hook for picot, ch 2, small puff st in next loop, repeat from * 5 times, ch 5, sl st in 3rd st from hook for picot, ch 2, repeat from ** 8 times, 1 d c in each of the next 2 loops keeping last loop of each d c on hook, thread over and pull through all loops at one time, repeat from 1st * all around ending row to correspond, join, cut thread.

Red & White Periwinkle Edging #819

Illustrated on center pages

Materials Required:

AMERICAN THREAD COMPANY “STAR” TATTING CROCHET, Article 25

1 ball each White and Bright Red

1 Handkerchief

Steel crochet hook No. 13

With Red ch 5, join to form a ring, ch 1 and work 10 s c in ring, join, drop Red.

Attach White in 1st s c, * ch 4, 3 d tr c (3 times over hook) in same space, 3 d tr c in next s c, ch 4, sl st in same space, sl st in next s c, repeat from * 4 times, cut White thread.

Next Row—Pick up Red, ch 4, 1 s c in each of the 6 d tr c of 1st petal, ch 4, sl st in 1st row between petals, * ch 4, 1 s c in each of the 6 d tr c of next petal, ch 4, sl st in 1st row between petals, repeat from * 3 times, cut thread. Work a 2nd flower joining center of one petal to center of any petal of 1st flower in last row. Work a 3rd flower joining to 2nd flower in same manner leaving 1 petal free at lower edge and 2 petals at outside edge. Work a 4th flower same as 1st flower.

Sew the 3 flowers in corner as illustrated leaving 2 entire petals of side flowers extend over the hem of handkerchief.

Sew 4th flower between the 2 upper flowers as illustrated. Attach White in hem next to flower to left of corner flower and working around handkerchief, * ch 5, skip ¼ inch space, s c in next space, repeat from * to corner having an uneven number of loops on side, ch 7, s c in same space (corner), * ch 5, skip ¼ inch space, s c in next space, repeat from * all around having an uneven number of loops on each side not counting corner loop and working all corners same as 1st corner, working to flower on last side, cut thread.

2nd Row—Attach White in 1st loop on opposite side, * ch 6, cluster st in next loop (cluster st: 4 d c in same space keeping last loop of each d c on hook, thread over and pull through all loops at one time), ch 6, s c in next loop, repeat from * across side to corner loop, ch 6, 2 cluster sts with ch 6 between in corner loop, ch 6, s c in next loop, * ch 6, cluster st in next loop, ch 6, s c in next loop, repeat from * all around to flower at opposite side working all corners same as 1st corner, cut thread.

3rd Row—Attach Red in same space where 1st row was started, ch 6, s c in top of 1st cluster st, ch 3, s c in same space, ch 6, sl st in next s c, * ch 6, s c in top of next cluster st, ch 3, s c in same space, ch 6, sl st in next s c, repeat from * to the s c before corner, ch 6, s c in top of 1st cluster st at corner, ch 3, s c in same space, ch 5, s c in next loop, ch 5, s c in top of next cluster st at corner, ch 3, s c in same space, * ch 6, sl st in next s c, ch 6, s c in top of next cluster st, ch 3, s c in same space, repeat from * around next 3 sides working all corners same as 1st corner and working to flower on last side, cut thread.

Lavender and Pink Edging with Knot Stitch Border #8110

Illustrated on center pages

Materials Required:

AMERICAN THREAD COMPANY “STAR” TATTING CROCHET, Article 25

2 balls Lavender
1 ball Shaded Pinks
1 Handkerchief

Steel crochet hook No. 13

Attach Lavender in corner and work a double knot st (double knot st: * draw up a ³/₁₆ inch loop on hook, thread over hook and pull through loop forming a ch st, s c over single loop of st, repeat from * once), s c in same space, * work a double knot st, skip 3 hemstitched spaces or about ⁵/₁₆ inch space, s c in next space, repeat from * all around having an uneven number of double knot sts on each side without counting corner double knot st working all corners same as 1st corner and ending row with double knot st, s c in same space as beginning.

2nd Row—Double knot st, s c in loop to right of s c of corner double knot st, double knot st, s c in loop to left of s c of same corner double knot st (an increase), * double knot st, s c in center s c of next double knot st, repeat from * all around increasing 1 double knot st at each corner. Without joining rows work 1 more row of double knot sts increasing 1 double knot st in each corner ending row with double knot st, s c in center s c of double knot st to right of corner double knot st, cut thread.

4th Row—Attach Shaded Pinks in same space, * ch 5, sl st in 3rd st from hook for picot, repeat from * once, ch 2, 7 sl st in loop to right of s c of corner double knot st, ch 5, sl st in 3rd st from hook for picot, ch 5, sl st in 3rd st from hook for picot, ch 2 (double picot loop), sl st in loop to left of s c of same double knot st, * work a double picot loop, sl st in center s c of next double knot st, repeat from * all around to last free knot st working all corners same as 1st corner, work a double picot loop, sl st in center of 1st double picot loop made.

5th Row—Double picot loop, sl st between picots of corner loop, double picot loop, sl st in same space, * double picot loop, sl st between picots of next double picot loop, repeat from * all around working all corners same as 1st corner and joining last double picot loop in center of loop to right of corner, cut thread.

6th Row—Attach Lavender in same space, work a double knot st, s c between the 2 picots of corner loop, double knot st, s c in same space, * double knot st, s c between picots of next loop, repeat from * all around working all corners same as 1st corner. Without joining rows work 3 more rows of double knot sts increasing 1 double knot st at each corner ending last row with s c in center of double knot st to right of corner double knot st, cut thread.

Next Row—Attach Shaded Pinks in same space, ch 3, tr c in center s c of corner double knot st, ch 3, sl st in top of tr c for picot, * ch 2, tr c in same space, ch 3, sl st in top of last tr c for picot, repeat from * 3 times, * ch 3, s c in center s c of next double knot st, ch 3, tr c in center s c of next double knot st, ch 3, sl st in top of tr c for picot, ch 2, tr c in same space, picot, ch 2, tr c in same space, picot, repeat from * all around working all corners same as 1st corner, cut thread.

Green Handkerchief with White Rice Stitch Edging #8111

Illustrated on center pages

Materials Required:

AMERICAN THREAD COMPANY “STAR” TATTING CROCHET, Article 25

4 balls White or color desired

1 Handkerchief

Steel crochet hook No. 13

Attach thread in 1st hemstitched space to right of corner, ch 8, 2 d c in 4th st from hook leaving last loop of each d c on hook, thread over and pull through all loops at one time, ** 1 tr c, ch 3, 1 tr c in corner space, ch 4, 2 d c in 4th st from hook leaving last loop of each d c on hook, thread over and pull through all loops at one time (a rice st), tr c in next hemstitched space, * work a rice st, skip 3 hemstitched spaces (about ⁵/₁₆ inch), 1 tr c, ch 3, 1 tr c in next space, work a rice st, skip 3 hemstitched spaces, tr c in next space, repeat from * across side of handkerchief ending with 1 tr c in hemstitched space to right of next corner, work a rice st, repeat from ** all around ending row with rice st, join in 4th st of ch 8.

2nd Row—Ch 7, tr c in same space, rice st, 4 tr c with ch 3 between each tr c in corner loop, * rice st, 2 tr c with ch 3 between in next tr c, rice st, tr c in next loop, repeat from * all around working all corners same as 1st corner ending row with rice st, join in 4th st of ch.

3rd Row—Sl st into loop, ch 8, rice st in 4th st from hook, 1 tr c, ch 3, 1 tr c in next loop, ch 3, 1 tr c, ch 5, 1 tr c in next loop, ch 3, 1 tr c, ch 3, 1 tr c in next loop, * rice st, tr c in next loop, rice st, 1 tr c, ch 3, 1 tr c (shell) in next tr c, repeat from * all around working all corners same as 1st corner and ending row with rice st, join in 4th st of ch.

4th Row—Ch 7, tr c in same space, rice st, shell in next loop, ch 3, shell in next loop, ch 3, 1 tr c, ch 5, 1 tr c in next loop, ch 3, shell in next loop, ch 3, shell in next loop, * rice st, shell in next tr c, rice st, 1 tr c in next shell, repeat from * all around working all corners same as 1st corner and joining last rice st in 4th st of ch.

5th Row—Ch 8, rice st in 4th st from hook, shell in next shell, ch 3, skip 1 loop, shell in next shell, ch 3, skip 1 loop, 1 tr c, ch 5, 1 tr c in next loop, * ch 3, skip 1 loop, shell in next shell, repeat from * once, * rice st, tr c in next shell, rice st, shell in next tr c, repeat from * all around working all corners same as 1st corner and joining last rice st in 4th st of ch.

6th Row—Ch 7, tr c in same space, rice st, shell in next shell, ch 3, skip 1 loop, shell in next shell, ch 3, skip 1 loop, shell in next loop, ch 5, shell in same space, * ch 3, skip 1 loop, shell in next shell, repeat from * once, rice st, shell in next tr c, rice st, 1 tr c in next shell, repeat from * all around working all corners same as 1st corner, ending row to correspond, joining last rice st in 4th st of ch.

7th Row—Ch 8, rice st in 4th st from hook, shell in next shell, * ch 3, skip 1 loop, shell in next shell, repeat from * once, ch 3, 1 tr c, ch 5, 1 tr c in next loop, ch 3, shell in next shell, * ch 3, skip 1 loop, shell in next shell, repeat from * once, * rice st, tr c in next shell, rice st, shell in next tr c, repeat from * all around working all corners same as 1st corner and joining last rice st in 4th st of ch.

8th Row—Ch 7, tr c in same space, rice st, shell in next shell, * ch 3, skip 1 loop, shell in next shell, repeat from * once, ch 3, skip 1 loop, 1 tr c, ch 5, 1 tr c in next loop, * ch 3, skip 1 loop, shell in next shell, repeat from * twice, * rice st, shell in next tr c, rice st, 1 tr c in next shell, repeat from * all around working all corners same as 1st corner joining last rice st in 4th st of ch.

9th Row—Ch 8, rice st in 4th st from hook, shell in next shell, * ch 3, skip 1 loop, shell in next shell, repeat from * once, ch 3, skip 1 loop, shell in next loop, ch 5, shell in same space, * ch 3, skip 1 loop, shell in next shell, repeat from * twice, * rice st, tr c in next shell, rice st, shell in next tr c, repeat from * all around working all corners same as 1st corner and joining last rice st in 4th st of ch.

10th Row—Ch 4, cluster st in next shell (cluster st: 3 tr c in same space keeping last loop of each tr c on hook, thread over and pull through all loops at one time), ch 3, sl st in top of cluster st for picot, ch 3, cluster st in same shell, picot, ch 4, skip 1 loop, s c in next shell, ch 4, skip 1 loop, cluster st in next shell, picot, ch 3, cluster st in same shell, picot, ch 4, skip 1 loop, s c in next shell, ch 4, cluster st in corner loop, picot, ch 3, cluster st in same space, picot, ch 4, s c in next shell, ch 4, skip 1 loop, cluster st in next shell, picot, ch 3, cluster st in same shell, picot, ch 4, skip 1 loop, s c in next shell, ch 4, skip 1 loop, cluster st in next shell, picot, ch 3, cluster st in same shell, picot, ch 4, s c in next tr c, * ch 4, cluster st in next shell, picot, ch 3, cluster st in same shell, picot, ch 4, s c in next tr c, repeat from * all around working all corners same as 1st corner ending row to correspond, join, cut thread.

Narrow Pink Edging #8112

Illustrated on center pages

Materials Required:

AMERICAN THREAD COMPANY “STAR” TATTING CROCHET, Article 25

1 ball Med. Pink

1 Handkerchief

Steel crochet hook No. 13

Attach thread about ¼ inch from any corner, * ch 5, skip about ¼ inch space, s c in next space, repeat from * to about ¼ inch from next corner having an odd number of sts, ch 7, cluster st in corner space (cluster st: * 2 d c in same space keeping last loop of each st on hook, thread over and work off all loops at one time), ch 5, cluster st in same space, ch 7, skip about ¼ inch space, s c in next space, repeat from 1st * all around ending row with ch 3, d c in same space as beginning (this brings thread in position for next row).

2nd Row—Ch 5, d c in d c, * ch 3, 2 cluster sts with ch 3 between in center st of next loop, ch 3, 2 d c with ch 3 between in center st of next loop, repeat from * across row to loop before corner, ch 3, then in corner loop work 2 cluster sts with ch 3 between, ch 3, 2 d c with ch 3 between, ch 3, 2 cluster sts with ch 3 between, ch 3, 2 d c with ch 3 between in center st of next loop, repeat from 1st * all around, ch 3, join in 3rd st of ch.

3rd Row—Sl st in loop, * ch 6, sl st in 4th st from hook for picot, ch 2, skip one ch 3 loop, s c in next loop, repeat from * to 2nd loop before corner group, * ch 6, sl st in 4th st from hook for picot, ch 2, skip 1 loop, cluster st in next loop, ch 6, sl st in 4th st from hook for picot, ch 2, cluster st in same space, repeat from * twice, ch 6, sl st in 4th st from hook for picot, ch 2, skip 1 loop, s c in next loop, repeat from 1st * all around, cut thread.

8

#818 See Pg. 6
#819 See Pg. 6
#8110 See Pg. 6
#8111 See Pg. 7
#8112 See Pg. 7
#8113 See Pg. 11

10

Pineapple Pillow Case Edging #8118

Illustrated on page 13

This edging may be made with any of the AMERICAN THREAD COMPANY products listed below:

Material | Quantity | Size of Needle
“GEM” CROCHET COTTON Article 35, size 30 | 3 balls White or any color desired | steel 12
or
“STAR” CROCHET COTTON Article 20, size 30 | 3 balls White or any color desired | steel 12
or
“STAR” CROCHET COTTON Article 30, size 30 | 8 balls White or any color desired | steel 12
1 pair Pillow Cases

Ch 37, 2 d c in 4th st from hook, ch 2, 3 d c in next st of ch, * ch 3, skip 3 sts of ch, 3 d c in next st, ch 2, 3 d c in next st (shell), repeat from * once, ch 1, skip 1 st of ch, d c in next st, * ch 3, skip 1 st of ch, s c in next st, ch 3, skip 1 st of ch, d c in next st, repeat from * 3 times, ch 2, d c in end st, ch 5, turn.

2nd Row—D c in next d c, * ch 3, d c in next d c, repeat from * 3 times, ch 1, d c in same space, ch 1, shell in shell, ch 3, 11 tr c in next shell, ch 3, shell in shell, ch 4, turn.

3rd Row—Shell in shell, ch 3, s c between 1st 2 tr c, * ch 4, s c between next 2 tr c, repeat from * 8 times, ch 3, shell in shell, ch 1, d c in next single d c, ch 1, d c in next d c, * ch 3, s c in next mesh, ch 3, d c in next d c, repeat from * 3 times, ch 2, d c in 3rd st of ch, ch 5, turn.

4th Row—D c in next d c, * ch 3, d c in next d c, repeat from * 4 times, shell in shell, ch 3, s c in 1st loop of pineapple, * ch 4, s c in next loop, repeat from * 7 times, ch 3, shell in shell, ch 4, turn.

5th Row—Shell in shell, ch 3, s c in 1st loop of pineapple, * ch 4, s c in next loop, repeat from * 6 times, ch 3, shell in shell, ch 1, d c in next single d c, * ch 3, s c in next mesh, ch 3, d c in next d c, repeat from * 4 times, ch 2, d c in 3rd st of ch, ch 5, turn.

6th Row—D c in next d c, * ch 3, d c in next d c, repeat from * 4 times, ch 1, d c in same space, ch 1, shell in shell, ch 3, s c in 1st loop of pineapple, * ch 4, s c in next loop, repeat from * 5 times, ch 3, shell in shell, ch 4, turn.

7th Row—Shell in shell, ch 3, s c in 1st loop of pineapple, * ch 4, s c in next loop, repeat from * 4 times, ch 3, shell in shell, ch 1, d c in next d c, ch 1, d c in next d c, * ch 3, 1 s c in next mesh, ch 3, d c in next d c, repeat from * 4 times, ch 2, d c in 3rd st of ch, ch 5, turn.

8th Row—D c in next d c, * ch 3, d c in next d c, repeat from * 5 times, shell in shell, ch 3, s c in 1st loop of pineapple, * ch 4, s c in next loop, repeat from * 3 times, ch 3, shell in shell, ch 4, turn.

9th Row—Shell in shell, ch 3, s c in 1st loop of pineapple, * ch 4, 1 s c in next loop, repeat from * twice, ch 3, shell in shell, ch 1, d c in next d c, * ch 3, s c in next mesh, ch 3, d c in next d c, repeat from * 5 times, ch 2, d c in 3rd st of ch, ch 5, turn.

10th Row—D c in next d c, * ch 3, d c in next d c, repeat from * 5 times, ch 1, d c in same space, ch 1, shell in shell, ch 3, s c in 1st loop of pineapple, * ch 4, s c in next loop, repeat from * once, ch 3, shell in shell, ch 4, turn.

11th Row—Shell in shell, ch 3, s c in 1st loop of pineapple, ch 4, s c in next loop, ch 3, shell in shell, ch 1, d c in next single d c, ch 1, d c in next d c, * ch 3, s c in next mesh, ch 3, d c in next d c, repeat from * 5 times, ch 2, d c in 3rd st of ch, ch 5, turn.

12th Row—D c in next d c, * ch 3, d c in next d c, repeat from * 6 times, shell in shell, ch 3, s c in remaining loop of pineapple, ch 3, shell in shell, ch 4, turn.

13th Row—Shell in shell, ch 1, shell in next shell, ch 1, d c in next single d c, * ch 3, s c in next mesh, ch 3, d c in next d c, repeat from * 6 times, ch 2, d c in 3rd st of ch, ch 5, turn.

14th Row—D c in next d c, * ch 3, d c in next d c, repeat from * 6 times, ch 1, d c in same space, ch 1, shell in shell, ch 2, s c in center of next shell, ch 2, turn.

15th Row—Shell in shell, ch 3, skip 1 single d c, shell in next d c, ch 3, skip 1 d c, shell in next d c, ch 1, d c in next d c, * ch 3, s c in next mesh, ch 3, d c in next d c, repeat from * 3 times, ch 2, d c in 3rd st of ch, ch 5, turn.

Repeat from 2nd row for length desired. Work a row of s c across top of edging. Sew to edge of pillow case. Work other pillow case in same manner.

Green Turkish Towel Edging #8117

Illustrated on page 12

Materials Required: AMERICAN THREAD COMPANY

“PURITAN” CROCHET COTTON, Article 40

or

“DE LUXE” CROCHET COTTON, Article 346
1 ball Shaded Nile Greens or color desired
1 Turkish Towel

Steel crochet hook No. 7

Ch 12, 2 d c in 7th st from hook, ch 1, 2 d c in next st of ch, ch 1, skip 2 sts of ch, 2 d c in next st, ch 1, 2 d c in next st, ch 3, turn.

2nd Row—2 d c, ch 1, 2 d c (shell) in next ch 1 loop, ch 1, skip next ch 1 loop, 2 d c, ch 1, 2 d c in next ch 1 loop, ch 1, d c in end loop, ch 4, turn.

3rd Row—Shell in center of 1st shell, ch 1, shell in center of next shell, ch 6, sl st in the ch 3 of previous row, ch 2, turn.

4th Row—8 s d c over loop just made (s d c: thread over hook, insert in space, pull loop through, thread over and pull through all loops at one time), ch 1, shell in center of 1st shell, ch 1, shell in center of next shell, ch 1, d c in 3rd st of end ch, ch 4, turn.

5th Row—Shell in center of 1st shell, ch 1, shell in center of next shell, ch 6, sl st in the ch 1 of previous row next to the 1st scallop, ch 2, turn.

6th Row—4 s d c over loop just made, ch 6, drop loop from hook, insert hook in center st of previous scallop, pick up loop and pull through, ch 2, 4 s d c over loop just made, ch 3, sl st in top of last s d c for picot, 4 s d c over same loop, 4 s d c over remainder of previous loop, ch 1, shell in center of next shell, ch 1, shell in center of next shell, ch 1, d c in 3rd st of ch, ch 4, turn.

7th Row—Shell in center of 1st shell, ch 1, shell in center of next shell, ch 6, sl st in the ch 1 of previous row, ch 3, turn.

8th Row—8 d c over loop just made, ch 1, shell in center of shell, ch 1, shell in center of next shell, ch 1, d c in 3rd st of ch, ch 4, turn.

9th Row—Shell in center of 1st shell, ch 1, shell in center of next shell, ch 1, skip the 2 d c of same shell, 1 d c in each of the next 8 d c with ch 1 between each d c, ch 1, sl st in 4th s d c where previous scallop is joined, turn.

10th Row—Ch 4, sl st in 3rd st from hook for picot, ch 1, s c between 1st 2 d c, * ch 4, sl st in 3rd st from hook for picot, ch 1, s c between next 2 d c, repeat from * 6 times, ch 3, shell in center of next shell, ch 1, shell in center of next shell, ch 1, d c in 3rd st of ch, ch 4, turn.

Repeat from 3rd row for length desired.

Sew to end of towel.

Guest Towel Edging #8116

Illustrated on page 13

This edging may be made with any of the AMERICAN THREAD COMPANY products listed below:

Material | Quantity | Size of Needle
“GEM” CROCHET COTTON Article 35, size 30 | 1 ball Shaded Light Yellows or any color desired | steel 11 or 12
or
“STAR” CROCHET COTTON Article 30, size 30 | 1 ball Shaded Light Yellows or any color desired | steel 11 or 12
1 Guest Towel

Ch 11, d c in 4th st from hook, ch 2, skip 2 sts of ch, d c in next st of ch, ch 3, skip 3 sts of ch, 5 d c in next st, ch 3, turn.

2nd Row—Sl st in 3rd st from hook for picot, * ch 3, sl st in 3rd st from hook for picot, repeat from * once, 5 d c in 1st d c, ch 3, skip 3 d c of same group, s c in next d c, ch 3, d c in next d c, ch 2, 1 d c in next d c, d c in 3rd st of ch, ch 3, turn.

3rd Row—D c in next d c, ch 2, d c in next d c, ch 3, 5 d c in next d c, ch 3, turn.

Repeat the 2nd and 3rd rows for length desired.

Sew to end of towel.

11

TATTING ABBREVIATIONS
R | Ring
L R | Large Ring
S R | Small Ring
D or D S | Double or Double Stitch
P | Picot
S P | Short Picot
L P | Long Picot
Ch | Chain
Sp | Space
Sep | Separate
Cl | Close

Fuchsia & White Hairpin Lace Edging #8113

Illustrated on center pages

Materials Required: AMERICAN THREAD COMPANY

“STAR” TATTING CROCHET, Article 25

2 balls each White and Fuchsia or any contrasting color

1 Handkerchief 11 inches x 11 inches

Hairpin staple ½ inch wide

Steel crochet hook No. 13

See directions for hairpin lace on page 2.

With White work a strip of hairpin lace to fit around handkerchief (about 480 loops on each side of staple).

Attach Fuchsia through 1st 3 loops of hairpin lace keeping the twist in the loops, * ch 4, s c through next 3 loops, repeat from * across lace, cut thread.

Sew this side to handkerchief easing in a little fullness at each corner.

With White work another length of hairpin lace same as 1st length allowing 6 loops more for each corner.

Join 2nd length to 1st length as follows: attach Fuchsia through 1st 3 loops of 1st length, ch 2, s d c in same space (s d c: thread over hook, insert in st, pull through, thread over and pull through all loops at one time), ch 2, thread over hook, insert in 1st 3 loops of 2nd length, thread over and pull loop up about ⅛ inch, thread over, insert through same 3 loops, thread over and pull loop up the same length, thread over and pull through all 5 loops at one time, * ch 2, thread over hook, insert through next 3 loops of 1st length, thread over and pull loop up about ⅛ inch, thread over hook, insert through same 3 loops, pull loop up the same length, thread over and pull through all 5 loops at one time (small puff st) ch 2, small puff st through next 3 loops of 2nd length, repeat from * to the 3 loops before corner 3 loops of 1st length, ch 2, small puff st through next 3 loops of 1st length, ch 2, small puff st through next 3 loops of 2nd length, ch 2, small puff st through same 3 loops of 1st length, * ch 2, small puff st through next 3 loops of 2nd length, ch 2, small puff st through next 3 loops of 1st length, ch 2, small puff st through next 3 loops of 2nd length, ch 2, small puff st through same 3 loops of 1st length, repeat from * once, * ch 2, small puff st through next 3 loops of 2nd length, ch 2, small puff st through next 3 loops of 1st length, repeat from * across each side, working all corners same as 1st corner, join, cut thread.

Next Row—Attach Fuchsia in 1st of the 3 corner loops, ** ch 5, s c in next loop, ch 5, s c in next loop, * ch 4, s c through next 3 loops, repeat from * to 1st loop at next corner, repeat from ** all around ending row to correspond, ch 4, join.

Next Row—sl st into loop, ch 3, 2 d c in same space keeping last loop of each d c on hook, thread over and pull through all loops at one time, ch 5, sl st in 3rd st from hook for picot, ch 2, cluster st in same space (cluster st: 3 d c in same space keeping last loop of each d c on hook, thread over and pull through all loops at one time), ch 5, sl st in 3rd st from hook for picot, ch 2 (picot loop), 2 cluster sts with picot loop between in next loop, * picot loop, cluster st in next loop, repeat from * all around working all corners same as 1st corner ending row to correspond, join, cut thread.

CROCHET ABBREVIATIONS
ch | Chain
st | Stitch
sts | Stitches
sl-st | Slip st.
s c | Single Crochet
s d c | Short Double Crochet
d c | Double Crochet
tr c | Treble Crochet
d tr c | Double Treble Crochet
tr tr c | Triple Treble Crochet

* Asterisk—This sign indicates that the instructions immediately following are to be repeated the given number of times plus the original.

** Are used in the same way.

12

Shaded Green Edging #8117
Instructions on Page 10
Gray Towel Edging #8115
Instructions on Page 13

Motif Pillow Case Edging #8119

This edging may be made with any of the AMERICAN THREAD COMPANY products listed below:

Material | Quantity | Size of Needle
“GEM” CROCHET COTTON Article 35, size 30 | 3 balls Shaded Peaches or color desired | steel 12
or
“STAR” CROCHET COTTON Article 20, size 30 | 4 balls Shaded Peaches or color desired | steel 12
or
“STAR” CROCHET COTTON Article 30, size 30 | 8 balls Shaded Peaches or color desired | steel 12
1 pair Pillow Cases

Ch 5, join to form a ring, ch 1 and work 8 s c in ring, join in 1st s c.

2nd Row—Ch 6, d c in next s c, ch 3, d c in next s c, repeat from * 5 times, ch 3, join in 3rd st of ch.

3rd Row—Sl st to center of loop, ch 4, 2 tr c in same space keeping last loop of each tr c on hook, thread over and pull through all loops at one time, * ch 3, cluster st in next loop (cluster st: 3 tr c in same space keeping last loop of each tr c on hook, thread over and pull through all loops at one time), ch 10, cluster st in same space (corner), ch 3, cluster st in next loop, repeat from * twice, ch 3, 2 cluster sts with ch 10 between in next loop, ch 3, join in top of 1st cluster st.

4th Row—Ch 1, ** 3 s c in next loop, ch 3, sl st in top of last s c for picot, 2 s c in same space, 3 s c in next loop, * ch 3, sl st in top of last s c for picot, 3 s c in same space, repeat from * twice, 3 s c, picot, 2 s c in next loop, repeat from ** 3 times, join.

5th Row—Ch 8, tr c in space over next cluster st of 3rd row, ** ch 4, d c in center picot of corner loop, ch 4, tr c in same picot, ch 4, d c in same picot, * ch 4, tr c in space over next cluster st of 3rd row, repeat from * twice, repeat from ** all around ending row to correspond, join in 4th st of ch.

6th Row—Ch 1, s c in same space, ch 3, sl st in top of last s c for picot, 4 s c in next loop, s c in next tr c, ch 3, sl st in top of last s c for picot, ** 4 s c in next loop, s c in next d c, ch 3, sl st in top of last s c for picot, 4 s c in next loop, s c in next tr c, ch 7, sl st in top of same s c, 4 s c in next loop, s c in next d c, ch 3, sl st in top of last s c for picot, * 4 s c in next loop, s c in next tr c, ch 3, sl st in top of last s c for picot, repeat from twice, repeat from ** all around ending row to correspond, cut thread.

Work a 2nd motif joining it to 1st motif in last row as follows: ch 1, s c in same space, ch 3 picot, 4 s c in next loop, s c in next tr c, ch 3 picot, 4 s c in next loop, s c in next d c, ch 3 picot, 4 s c in next loop, s c in next tr c, ch 3, join to ch 7 picot at corner of 1st motif, ch 3, sl st in top of same s c on 2nd motif, 4 s c in next loop, s c in next d c, ch 1, join to next picot of 1st motif, ch 1, complete picot, * 4 s c in next loop of 2nd motif, s c in next tr c, ch 1, join to next picot of 1st motif, ch 1, complete picot, repeat from * twice, 4 s c in next loop, s c in next d c, ch 1, join to next picot of 1st motif, ch 1, complete picot, 4 s c in next loop, s c in next tr c, ch 3, join to ch 7 picot at next corner of 1st motif, ch 3, sl st in top of same s c, finish motif same as 1st motif.

Work 3rd motif same as 1st motif.

Work 4th motif in same manner but joining 1 side of 4th motif to 1 side of 3rd motif same as before and joining the next side of 4th motif to side of 1st motif of 1st 2 motifs made as illustrated.

Work 28 more motifs and join in same manner.

Sew to lower edge of pillow case. Cut away extra material from underneath motifs. Work other pillow case in same manner.

13

Shaded Yellow Guest Towel Edging #8116
Instructions on Page 10
Pineapple Pillow Edging #8118
Instructions on Page 10

Gray Towel Edging #8115

This edging may be made with any of the AMERICAN THREAD COMPANY products listed below:

Material | Quantity | Size of Needle
“DE LUXE” CROCHET COTTON Article 346 | 1 ball each Peach and Lt. Green | steel 7
or
“PURITAN” CROCHET COTTON Article 40 | 1 ball each Pink and Nile Green | steel 7
or
“STAR” PEARL COTTON Article 90, size 5 | 2 balls Lt. Peach 1 ball Nile Green | steel 7
1 Turkish Towel

With Peach ch 12, 2 d c in 6th st from hook, ch 2, 2 d c in next st, ch 4, skip 4 sts of ch, sl st in last st, ch 3, turn.

2nd Row—9 d c in 1st loop, ch 1, 2 d c, ch 2, 2 d c (shell) in next loop, ch 5, turn.

3rd Row—Shell in center of shell, ch 1, 1 d c in each d c and 1 d c in 3rd st of end ch, ch 4, turn.

4th Row—1 d c in each d c with ch 1 between each d c, ch 2, shell in center of shell, ch 5, turn.

5th Row—Shell in shell, ch 2, 1 d c in each d c with ch 1 between each d c, ch 1, d c in 3rd st of ch, ch 3, turn.

6th Row—* D c in next mesh, d c in next d c, repeat from * 8 times, ch 3, shell in shell, ch 5, turn.

7th Row—Shell in shell, ch 3, s c in 1st d c, * ch 4, skip 1 d c, s c in next d c, repeat from * 8 times, ch 4, turn.

8th Row—S c in 1st loop, * ch 4, s c in next loop, repeat from * 7 times, ch 3, shell in shell, ch 5, turn.

9th Row—Shell in shell, ch 4, skip 1 loop, s c in next loop, ch 3, turn. Repeat from 2nd row for length desired. Sew to lower edge of towel as illustrated.

Attach Green in corner of towel to right of work, ch 1, 1 s c in each of the next 2 d c of shell, 2 s c in next loop, ch 3, sl st in last s c for picot, 1 s c in same loop, 1 s c in each of the next 2 d c, 2 s c, ch 3 picot, 1 s c in next loop, repeat from * 8 times, ** 3 s c, ch 3 picot, 2 s c in loop at point, working downward * 2 s c, ch 3 picot, 1 s c over next d c, repeat from * 3 times, 1 s c over next d c, 1 s c over s c between scallops, ch 3 picot, 1 s c in same loop with s c of previous row, * 2 s c, ch 3 picot, 1 s c in next loop, repeat from * 6 times, repeat from ** across row finishing opposite side to correspond.

Shaded Pink Edging #8114

This edging may be made with any of the AMERICAN THREAD COMPANY products listed below:

Material | Quantity | Size of Needle
“GEM” CROCHET COTTON Article 35, size 30 | 1 ball Shaded Pinks or color desired | steel 11 or 12
or
“STAR” CROCHET COTTON Article 20, size 30 | 1 ball Shaded Pinks or color desired | steel 11 or 12
or
“STAR” CROCHET COTTON Article 30, size 30 | 1 ball Shaded Pinks or color desired | steel 11 or 12
1 Guest Towel

Ch 4, d c in 4th st from hook, ch 2, 2 d c in same space, ch 5, turn.

2nd Row—2 d c, ch 2, 2 d c (shell) in the ch 2 loop, ch 5, turn.

3rd & 4th Rows—Shell in center of shell, ch 5, turn.

5th Row—Shell in center of shell, ch 3, working along side of edging, work 5 d c with ch 3 between each d c in next ch 5 loop, ch 3, s c in next ch 5 loop on side, ch 3, turn.

6th Row—Cluster st in next d c (cluster st: 3 d c in same space keeping last loop of each d c on hook, thread over and pull through all loops at one time), ch 3, sl st in top of cluster st for picot, * ch 4, cluster st in next d c, picot, repeat from * 3 times, ch 3, s c in next loop, ch 3, shell in center of shell, ch 5, turn.

Next 4 Rows—Shell in center of shell, ch 5, turn. Repeat from 5th row for length desired. Sew to end of towel.

14

Crocheted Motif and Edging #815

Illustrated on page 3

Materials Required:

AMERICAN THREAD COMPANY “STAR” TATTING CROCHET, Article 25

2 balls White or color desired

1 Handkerchief

Steel crochet hook No. 13

Ch 5, join to form a ring, ch 1 and work 8 s c in ring, join.

2nd Row—Ch 3, 2 d c in same space keeping last loop of each d c on hook, thread over and pull through all loops at one time, * ch 5, cluster st in next s c (cluster st: 3 d c in same space keeping last loop of each d c on hook, thread over and pull through all loops at one time), repeat from * 6 times, ch 5, join.

3rd Row—Sl st to center of loop, * ch 7, s c in next loop, repeat from * all around.

4th Row—Sl st into loop, ch 3 (counts as part of 1st cluster st) and work 2 cluster sts with ch 3 between in same space, * ch 7, 2 cluster sts with ch 3 between in same space, ch 5, s c in next loop, ch 3, sl st in top of s c for picot, ch 5, 2 cluster sts with ch 3 between in next loop, repeat from * twice, ch 7, 2 cluster sts with ch 3 between in same space, ch 5, s c in next loop, ch 3, sl st in top of s c for picot, ch 5, join in 1st cluster st, cut thread.

Work a 2nd motif joining it to 1st motif in last row as follows: sl st into loop, ch 3, 2 d c in same space keeping last loop of each d c on hook, thread over and pull through all loops at one time, ch 3, cluster st in same space, ch 3, join to corner loop of 1st motif, ch 3, 2 cluster sts with ch 3 between in same space of 2nd motif, ch 2, join in next ch 5 loop of 1st motif, ch 2, s c in next loop of 2nd motif, ch 3, sl st in top of s c for picot, ch 2, s c in next loop of 1st motif, ch 2, 2 cluster sts with ch 3 between in next loop of 2nd motif, ch 3, join to corner loop of 1st motif, ch 3, 2 cluster sts with ch 3 between in same space of 2nd motif, finish motif same as 1st motif. Join 3rd motif to 2nd motif and 4th motif to 3rd and 1st motifs in same manner. Applique motifs to corner of handkerchief having the 2 sides even with hem of handkerchief. Cut away material from underneath motifs.

EDGE: Attach thread on linen to left of corner, 1 s c in same space, * 2 s c in next space, 1 s c in next space, repeat from * all around to opposite side of motif, working 3 s c in each corner of handkerchief.

Next Row—Working on motif, * ch 6, skip 2 cluster sts, s c in next loop, ch 6, s c in next loop, repeat from * twice, ch 6, s c in corner loop, ch 6, s c in same space, * ch 6, skip 2 cluster sts, s c in next loop, ch 6, s c in next loop, repeat from * twice, ch 6, s c in corner loop, * ch 6, skip 3 s c, s c in next s c, repeat from * across side to corner having an uneven number of loops, ch 6, s c in same space at corner, continue in same manner all around working all corners same as 2nd corner.

Next Row—Sl st to center st of 1st loop of motif, s c in same space, * ch 5, cluster st in next loop, ch 3, sl st in top of cluster st for picot, ch 3, cluster st in same loop, picot in top of cluster, ch 5, s c in next loop, repeat from * twice, ch 5, cluster st in corner loop, picot, * ch 3, cluster st in same space, picot, repeat from * once, * ch 5, s c in next loop, ch 5, cluster st in next loop, picot, ch 3, cluster st in same space, picot, repeat from * 3 times, ** ch 3, s c in next loop, * ch 3, cluster st in next loop, picot, ch 3, cluster st in same space, picot, ch 3, s c in next loop, repeat from * to loop before corner loop, ch 3, cluster st in corner loop, picot, * ch 3, cluster st in same space, picot, repeat from * once, repeat from ** all around ending row to correspond and working the 2 remaining corners same as 2nd corner.

Handkerchief with White Rice Stitch Edging #8120

Illustrated on back cover

Materials Required:

AMERICAN THREAD COMPANY “STAR” TATTING CROCHET, Article 25

3 balls White or color desired

1 Handkerchief 11 inches square

Steel crochet hook No. 13

Attach thread in 4th space to right from corner, ch 6, d c in same space, skip 2 spaces (about ¼ inch), 1 d c, ch 3, 1 d c in next space, ch 4, 2 d c in 4th st from hook keeping last loop of each d c on hook, thread over and pull through all loops at one time (a rice st), 1 d c, ch 3, 1 d c (shell) in corner space, ch 4, rice st in 4th st from hook, 1 d c, ch 3, 1 d c (shell) in next space, ** skip 2 spaces, shell in next space, * ch 4, rice st in 4th st from hook, skip 2 spaces, shell in next space, skip 2 spaces, shell in next space, repeat from * to space before next corner ending with the 2 shells having the last shell in space before the corner, work a rice st, shell in corner space, work a rice st, shell in next space, repeat from ** all around working all corners same as 1st corner, ending row with rice st, join in 3rd st of ch.

2nd Row—Sl st into loop, ch 6, d c in same space, shell in next shell, work a rice st, shell in corner shell, * work a rice st, shell in next shell, shell in next shell, repeat from * all around working all corners same as 1st corner and joining last rice st in 3rd st of ch.

3rd Row—Sl st into shell, ch 6, d c in same space, shell in next shell, work a rice st, 2 d c with ch 3 between in corner loop, ch 5, 2 d c with ch 3 between in same space, * rice st, shell in each of the next 2 shells, repeat from * all around working all corners same as 1st corner, joining last rice st in 3rd st of ch.

4th Row—Same as last row but working a shell in each of the 3 loops at each corner.

5th Row—Same as last row but working a shell in each shell at each corner.

6th Row—Work a shell in each shell and a rice st over each rice st working 1 d c, ch 3, 1 d c, ch 5, 1 d c, ch 3, 1 d c in center shell at each corner. Repeat the 5th and 6th rows once.

9th Row—Sl st into shell, ch 7, sl st in 3rd st from hook for picot, ch 1, d c in same space, d c in next shell, ch 4, sl st in 3rd st from hook for picot, ch 1, d c in same space, rice st, * d c in next shell, ch 4, sl st in 3rd st from hook for picot, ch 1, d c in same space, repeat from * 6 times, * rice st, work 1 d c, ch 1, ch 3 picot, ch 1, 1 d c in each of the next 2 shells, repeat from * all around working all corners same as 1st corner, join, cut thread.

15

Yellow Edging #8121

Illustrated on back cover

Materials Required:

AMERICAN THREAD COMPANY “STAR” TATTING CROCHET, Article 25

4 balls Yellow

1 Handkerchief

Steel crochet hook No. 13

Attach thread about ½ inch from any corner, ch 3, 1 d c in each of the next 2 spaces keeping last loop of each st on hook, thread over and work off all loops at one time, ch 7, 1 d c in each of the next 3 spaces keeping last loop of each st on hook, thread over and work off all loops at one time, ** ch 7, 3 d c in corner space keeping last loop of each st on hook, thread over and work off all loops at one time, * ch 7, 1 d c in each of the next 3 spaces keeping last loop of each st on hook, thread over and work off all loops at one time, repeat from * to next corner space, repeat from ** all around in same manner ending row with ch 3, d c in top of 1st d c group (multiple of 4 plus 1 loop on each side).

2nd Row—Ch 3, 2 d c in d c, * ch 3, 3 d c in center st of next loop, repeat from * once, ** ch 5, 3 d c in top of 3 d c group at corner, ch 5, 3 d c in center st of next loop, * ch 3, 3 d c in center st of next loop, repeat from * to last loop before next corner, repeat from ** all around in same manner ending row to correspond.

3rd Row—Sl st to next loop, s c in same space, * ch 7, s c in next loop, repeat from * once, ** ch 11, s c in next loop (corner loop), * ch 7, s c in next loop, repeat from * to last loop on side, repeat from ** all around in same manner ending row with ch 3, tr c in 1st s c (this brings thread in position for next row).

4th Row—Ch 7, s c in next loop, ch 4, 3 d c in center st of next loop, ** ch 7, 3 d c, ch 7, 3 d c in center st of corner loop, ch 7, 3 d c in center st of next loop, * ch 4, s c in next loop, ch 8, s c in next loop, ch 8, s c in next loop, ch 4, 3 d c in center st of next loop, repeat from * to loop before corner loop, repeat from ** all around in same manner ending row with ch 3, tr c in tr c.

5th Row—Ch 8, s c in next loop, ch 4, 3 d c in next d c, ch 7, s c in next loop, ch 7, 3 tr c in next d c, ch 5, 3 tr c, ch 5, 3 tr c in center st of corner loop, ch 5, skip 2 d c, 3 tr c in next d c, ch 7, s c in next loop, ch 7, skip 2 d c, 3 d c in next d c, * ch 4, skip 1 loop, s c in next loop, ch 8, s c in next loop, ch 4, 3 d c in next d c, ch 5, skip 1 d c, 3 d c in next d c, repeat from * to 2nd d c group before corner d c group, ch 4, s c in next loop, repeat from beginning all around in same manner ending row to correspond.

6th Row—Sl st to 4th st of next loop, ch 3, 2 d c in same space, ch 3, 3 d c in next st of same loop, ** ch 4, 3 d c in next d c, ch 5, s c in next loop, ch 5, s c in next loop, 2 tr c in next tr c, ch 5, s c in next loop, ch 5, 3 tr c in next tr c, ch 1, 3 tr c, ch 3, 3 tr c in center st of corner loop, ch 1, skip 2 tr c, 3 tr c in next tr c, ch 5, s c in next loop, ch 5, skip 2 tr c, 2 tr c in next tr c, s c in next loop, ch 5, s c in next loop, ch 5, skip 2 d c, 3 d c in next d c, * ch 4, skip 1 loop, 3 d c in 4th st of next loop, ch 3, 3 d c in next st of same loop (shell), ch 4, 3 d c in next d c, ch 5, s c in next loop, ch 5, skip 2 d c, 3 d c in next d c, repeat from * to last 3 d c, ch 5, 3 d c group before corner group, ch 4, skip 1 loop, 3 d c in 4th st of next loop, ch 3, 3 d c in next st, repeat from ** all around in same manner ending row to correspond.

7th Row—Sl st to center of shell, ** ch 4, skip 1 loop, 3 d c in next d c, ch 5, s c in next loop, ch 6, skip 1 loop, d c in next s c, 1 d c in each of the next 2 tr c keeping last loop of each d c on hook, thread over and work off all loops at one time, ch 9, skip 1 loop, s c in next loop, ch 7, s c in next ch 1 loop, ch 7, s c in corner loop, ch 7, s c in next ch 1 loop, ch 7, s c in next loop, ch 9, 1 d c in each of the next 2 tr c, 1 d c in next s c, keeping last loop of each d c on hook, thread over and work off all loops at one time, ch 6, skip 1 loop, s c in next loop, ch 5, skip 2 d c, 3 d c in next d c, * ch 4, skip 1 loop, s c in next loop of shell, ch 4, skip l loop, 3 d c in next d c, ch 5, s c in next loop, ch 5, s c in next loop, ch 5, skip 2 d c, 3 d c in next d c, repeat from * to d c group before last shell, ch 4, s c in loop of next shell, repeat from ** all around ending row to correspond.

8th Row—Sl st to center st of next loop, ch 7, s c in next loop, * ch 7, s c in next loop, repeat from * 3 times, ch 11, s c in next loop (corner loop), * ch 7, s c in next loop, repeat from * 6 times, * ch 3, 3 d c in center st of next loop, ch 3, s c in next loop, ch 7, s c in next loop, ch 7, s c in next loop, ch 7, s c in next loop, repeat from * to 5th loop before corner, repeat from 1st * all around, ending row to correspond.

9th Row—Sl st to center st of next loop, * ch 7, sl st in 4th st from hook for picot, ch 3, s c in next loop, repeat from * 3 times, ch 5, sl st in 3rd st from hook for picot, ch 2, 2 d c in center st of corner loop, ch 3, sl st in top of last d c for picot, d c in same space, ch 5, sl st in 3rd st from hook for picot, ch 2, 2 d c, ch 3 picot, 1 d c in same space of corner loop, ch 5, sl st in 3rd st from hook for picot, ch 2, s c in next loop, * ch 7, sl st in 4th st from hook for picot, ch 3, s c in next loop, repeat from * 3 times, * ch 3, 2 d c, ch 3 picot, 1 d c in center st of next loop, ch 3, s c in next loop, ch 5, skip 1 loop, 2 d c, ch 3 picot, 1 d c in center d c of next d c group, ch 4, sl st in 3rd st from hook for picot, ch 1, 2 d c, ch 3 picot, 1 d c in same space, ch 5, skip 1 loop, s c in next loop, repeat from * to 8th loop before corner (counting corner loop), ch 3, 2 d c, ch 3 picot, 1 d c in center st of next loop, ch 3, s c in next loop, repeat from 1st * all around ending row to correspond, join, cut thread.

Tinted Pink and Blue Corner and Edging #8122

Illustrated on back cover

Materials Required:

AMERICAN THREAD COMPANY “STAR” TATTING CROCHET, Article 25

2 balls Tinted Pink and Blue or any color desired

Steel crochet hook No. 13

1 Handkerchief

MOTIF: Ch 5, join to form a ring, ch 1 and work 8 s c in ring, join in 1st s c.

2nd Row—Ch 6, d c in next s c, * ch 3, d c in next s c, repeat from * 5 times, ch 3, join in 3rd st of ch.

3rd Row—Sl st into loop, ch 3, 2 d c in same space leaving last loop of each d c on hook, thread over and pull through all loops at one time, ch 5, cluster st in same space (cluster st: 3 d c in same space keeping last loop of each d c on hook, thread over and pull through all loops at one time), * ch 3, d c in next loop, ch 3, 2 cluster sts with ch 5 between in next loop, repeat from * twice, ch 3, d c in next loop, ch 3, join.

4th Row—4 s c, ch 5, 4 s c over next loop (corner), 4 s c over next loop, s c in next d c, 4 s c over next loop, repeat from beginning all around, join.

5th Row—Sl st to the ch 5 loop at corner, ch 6, d c in same space, * ch 5, 2 d c with ch 3 between in same space, ch 5, skip 7 s c, 1 s c in each of the next 2 s c, ch 3, sl st in top of last s c for picot, s c in next s c, ch 5, skip 7 s c, 2 d c with ch 3 between in the ch 5 loop at next corner, repeat from * all around ending row with ch 5, 2 d c with ch 3 between in same space, ch 5, skip 7 s c, 1 s c in each of the next 2 s c, ch 3, sl st in top of last s c for picot, s c in next s c, ch 5, join in 3rd st of ch, cut thread.

Work a 2nd motif joining it to 1st motif in last row as follows: sl st to ch 5 loop at corner, ch 6, d c in same space, ch 2, s c in corner loop of 1st motif, ch 2, d c in same space of 2nd motif, ch 1, s c in next loop of 1st motif, ch 1, d c in same space of 2nd motif, ch 2, s c in next loop of 1st motif, ch 2, skip 7 s c, 1 s c in each of the next 2 s c of 2nd motif, picot, s c in next s c, ch 2, s c in next loop of 1st motif, ch 2, skip 7 s c, d c in corner loop of 2nd motif, ch 1, s c in next loop of 1st motif, ch 1, d c in same space of 2nd motif, ch 2, s c in center loop of 1st motif, ch 2, d c in same space of 2nd motif, ch 3, d c in same space, finish motif same as 1st motif. Join all motifs in same manner having 3 motifs in 1st row, 2 motifs in 2nd row and 1 motif in 3rd row. Sew in position at corner. Trim linen from underneath crocheted motifs.

EDGE: Attach thread on handkerchief to left of corner, * 1 s c in each of the next 5 spaces, ch 4, sl st in top of last s c for picot, repeat from * all around to same space at opposite side of same corner, join, cut thread.

16

See Pgs. 14 and 15 for instructions on above Edgings

Transcriber’s Notes

- Silently corrected a few typos.

- Relocated material “continued on remote page” for more conveniently-flowing text.

- Retained publication information from the printed edition: this eBook is public-domain in the country of publication.

- In the text versions only, text in italics is delimited by _underscores_.

*** END OF THE PROJECT GUTENBERG EBOOK EDGINGS: CROCHETED, TATTED, HAIR PIN LACE ***

Updated editions will replace the previous one—the old editions will be renamed.

Creating the works from print editions not protected by U.S. copyright law means that no one owns a United States copyright in these works, so the Foundation (and you!) can copy and distribute it in the United States without permission and without paying copyright royalties. Special rules, set forth in the General Terms of Use part of this license, apply to copying and distributing Project Gutenberg™ electronic works to protect the PROJECT GUTENBERG™ concept and trademark. Project Gutenberg is a registered trademark, and may not be used if you charge for an eBook, except by following the terms of the trademark license, including paying royalties for use of the Project Gutenberg trademark. If you do not charge anything for copies of this eBook, complying with the trademark license is very easy. You may use this eBook for nearly any purpose such as creation of derivative works, reports, performances and research. Project Gutenberg eBooks may be modified and printed and given away—you may do practically ANYTHING in the United States with eBooks not protected by U.S. copyright law. Redistribution is subject to the trademark license, especially commercial redistribution.

START: FULL LICENSE

THE FULL PROJECT GUTENBERG LICENSE

PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK

To protect the Project Gutenberg™ mission of promoting the free distribution of electronic works, by using or distributing this work (or any other work associated in any way with the phrase “Project Gutenberg”), you agree to comply with all the terms of the Full Project Gutenberg™ License available with this file or online at www.gutenberg.org/license.

Section 1. General Terms of Use and Redistributing Project Gutenberg™ electronic works

1.A. By reading or using any part of this Project Gutenberg™ electronic work, you indicate that you have read, understand, agree to and accept all the terms of this license and intellectual property (trademark/copyright) agreement. If you do not agree to abide by all the terms of this agreement, you must cease using and return or destroy all copies of Project Gutenberg™ electronic works in your possession. If you paid a fee for obtaining a copy of or access to a Project Gutenberg™ electronic work and you do not agree to be bound by the terms of this agreement, you may obtain a refund from the person or entity to whom you paid the fee as set forth in paragraph 1.E.8.

1.B. “Project Gutenberg” is a registered trademark. It may only be used on or associated in any way with an electronic work by people who agree to be bound by the terms of this agreement. There are a few things that you can do with most Project Gutenberg™ electronic works even without complying with the full terms of this agreement. See paragraph 1.C below. There are a lot of things you can do with Project Gutenberg™ electronic works if you follow the terms of this agreement and help preserve free future access to Project Gutenberg™ electronic works. See paragraph 1.E below.

1.C. The Project Gutenberg Literary Archive Foundation (“the Foundation” or PGLAF), owns a compilation copyright in the collection of Project Gutenberg™ electronic works. Nearly all the individual works in the collection are in the public domain in the United States. If an individual work is unprotected by copyright law in the United States and you are located in the United States, we do not claim a right to prevent you from copying, distributing, performing, displaying or creating derivative works based on the work as long as all references to Project Gutenberg are removed. Of course, we hope that you will support the Project Gutenberg™ mission of promoting free access to electronic works by freely sharing Project Gutenberg™ works in compliance with the terms of this agreement for keeping the Project Gutenberg™ name associated with the work. You can easily comply with the terms of this agreement by keeping this work in the same format with its attached full Project Gutenberg™ License when you share it without charge with others.

1.D. The copyright laws of the place where you are located also govern what you can do with this work. Copyright laws in most countries are in a constant state of change. If you are outside the United States, check the laws of your country in addition to the terms of this agreement before downloading, copying, displaying, performing, distributing or creating derivative works based on this work or any other Project Gutenberg™ work. The Foundation makes no representations concerning the copyright status of any work in any country other than the United States.

1.E. Unless you have removed all references to Project Gutenberg:

1.E.1. The following sentence, with active links to, or other immediate access to, the full Project Gutenberg™ License must appear prominently whenever any copy of a Project Gutenberg™ work (any work on which the phrase “Project Gutenberg” appears, or with which the phrase “Project Gutenberg” is associated) is accessed, displayed, performed, viewed, copied or distributed:

This eBook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org. If you are not located in the United States, you will have to check the laws of the country where you are located before using this eBook.

1.E.2. If an individual Project Gutenberg™ electronic work is derived from texts not protected by U.S. copyright law (does not contain a notice indicating that it is posted with permission of the copyright holder), the work can be copied and distributed to anyone in the United States without paying any fees or charges. If you are redistributing or providing access to a work with the phrase “Project Gutenberg” associated with or appearing on the work, you must comply either with the requirements of paragraphs 1.E.1 through 1.E.7 or obtain permission for the use of the work and the Project Gutenberg™ trademark as set forth in paragraphs 1.E.8 or 1.E.9.

1.E.3. If an individual Project Gutenberg™ electronic work is posted with the permission of the copyright holder, your use and distribution must comply with both paragraphs 1.E.1 through 1.E.7 and any additional terms imposed by the copyright holder. Additional terms will be linked to the Project Gutenberg™ License for all works posted with the permission of the copyright holder found at the beginning of this work.

1.E.4. Do not unlink or detach or remove the full Project Gutenberg™ License terms from this work, or any files containing a part of this work or any other work associated with Project Gutenberg™.

1.E.5. Do not copy, display, perform, distribute or redistribute this electronic work, or any part of this electronic work, without prominently displaying the sentence set forth in paragraph 1.E.1 with active links or immediate access to the full terms of the Project Gutenberg™ License.

1.E.6. You may convert to and distribute this work in any binary, compressed, marked up, nonproprietary or proprietary form, including any word processing or hypertext form. However, if you provide access to or distribute copies of a Project Gutenberg™ work in a format other than “Plain Vanilla ASCII” or other format used in the official version posted on the official Project Gutenberg™ website (www.gutenberg.org), you must, at no additional cost, fee or expense to the user, provide a copy, a means of exporting a copy, or a means of obtaining a copy upon request, of the work in its original “Plain Vanilla ASCII” or other form. Any alternate format must include the full Project Gutenberg™ License as specified in paragraph 1.E.1.

1.E.7. Do not charge a fee for access to, viewing, displaying, performing, copying or distributing any Project Gutenberg™ works unless you comply with paragraph 1.E.8 or 1.E.9.

1.E.8. You may charge a reasonable fee for copies of or providing access to or distributing Project Gutenberg™ electronic works provided that:

- • You pay a royalty fee of 20% of the gross profits you derive from the use of Project Gutenberg™ works calculated using the method you already use to calculate your applicable taxes. The fee is owed to the owner of the Project Gutenberg™ trademark, but he has agreed to donate royalties under this paragraph to the Project Gutenberg Literary Archive Foundation. Royalty payments must be paid within 60 days following each date on which you prepare (or are legally required to prepare) your periodic tax returns. Royalty payments should be clearly marked as such and sent to the Project Gutenberg Literary Archive Foundation at the address specified in Section 4, “Information about donations to the Project Gutenberg Literary Archive Foundation.”

- • You provide a full refund of any money paid by a user who notifies you in writing (or by e-mail) within 30 days of receipt that s/he does not agree to the terms of the full Project Gutenberg™ License. You must require such a user to return or destroy all copies of the works possessed in a physical medium and discontinue all use of and all access to other copies of Project Gutenberg™ works.

- • You provide, in accordance with paragraph 1.F.3, a full refund of any money paid for a work or a replacement copy, if a defect in the electronic work is discovered and reported to you within 90 days of receipt of the work.

- • You comply with all other terms of this agreement for free distribution of Project Gutenberg™ works.

1.E.9. If you wish to charge a fee or distribute a Project Gutenberg™ electronic work or group of works on different terms than are set forth in this agreement, you must obtain permission in writing from the Project Gutenberg Literary Archive Foundation, the manager of the Project Gutenberg™ trademark. Contact the Foundation as set forth in Section 3 below.

1.F.

1.F.1. Project Gutenberg volunteers and employees expend considerable effort to identify, do copyright research on, transcribe and proofread works not protected by U.S. copyright law in creating the Project Gutenberg™ collection. Despite these efforts, Project Gutenberg™ electronic works, and the medium on which they may be stored, may contain “Defects,” such as, but not limited to, incomplete, inaccurate or corrupt data, transcription errors, a copyright or other intellectual property infringement, a defective or damaged disk or other medium, a computer virus, or computer codes that damage or cannot be read by your equipment.

1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right of Replacement or Refund” described in paragraph 1.F.3, the Project Gutenberg Literary Archive Foundation, the owner of the Project Gutenberg™ trademark, and any other party distributing a Project Gutenberg™ electronic work under this agreement, disclaim all liability to you for damages, costs and expenses, including legal fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH DAMAGE.

1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a defect in this electronic work within 90 days of receiving it, you can receive a refund of the money (if any) you paid for it by sending a written explanation to the person you received the work from. If you received the work on a physical medium, you must return the medium with your written explanation. The person or entity that provided you with the defective work may elect to provide a replacement copy in lieu of a refund. If you received the work electronically, the person or entity providing it to you may choose to give you a second opportunity to receive the work electronically in lieu of a refund. If the second copy is also defective, you may demand a refund in writing without further opportunities to fix the problem.

1.F.4. Except for the limited right of replacement or refund set forth in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.

1.F.5. Some states do not allow disclaimers of certain implied warranties or the exclusion or limitation of certain types of damages. If any disclaimer or limitation set forth in this agreement violates the law of the state applicable to this agreement, the agreement shall be interpreted to make the maximum disclaimer or limitation permitted by the applicable state law. The invalidity or unenforceability of any provision of this agreement shall not void the remaining provisions.

1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the trademark owner, any agent or employee of the Foundation, anyone providing copies of Project Gutenberg™ electronic works in accordance with this agreement, and any volunteers associated with the production, promotion and distribution of Project Gutenberg™ electronic works, harmless from all liability, costs and expenses, including legal fees, that arise directly or indirectly from any of the following which you do or cause to occur: (a) distribution of this or any Project Gutenberg™ work, (b) alteration, modification, or additions or deletions to any Project Gutenberg™ work, and (c) any Defect you cause.

Section 2. Information about the Mission of Project Gutenberg™

Project Gutenberg™ is synonymous with the free distribution of electronic works in formats readable by the widest variety of computers including obsolete, old, middle-aged and new computers. It exists because of the efforts of hundreds of volunteers and donations from people in all walks of life.

Volunteers and financial support to provide volunteers with the assistance they need are critical to reaching Project Gutenberg™’s goals and ensuring that the Project Gutenberg™ collection will remain freely available for generations to come. In 2001, the Project Gutenberg Literary Archive Foundation was created to provide a secure and permanent future for Project Gutenberg™ and future generations. To learn more about the Project Gutenberg Literary Archive Foundation and how your efforts and donations can help, see Sections 3 and 4 and the Foundation information page at www.gutenberg.org.

Section 3. Information about the Project Gutenberg Literary Archive Foundation

The Project Gutenberg Literary Archive Foundation is a non-profit 501(c)(3) educational corporation organized under the laws of the state of Mississippi and granted tax exempt status by the Internal Revenue Service. The Foundation’s EIN or federal tax identification number is 64-6221541. Contributions to the Project Gutenberg Literary Archive Foundation are tax deductible to the full extent permitted by U.S. federal laws and your state’s laws.

The Foundation’s business office is located at 809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887. Email contact links and up to date contact information can be found at the Foundation’s website and official page at www.gutenberg.org/contact

Section 4. Information about Donations to the Project Gutenberg Literary Archive Foundation

Project Gutenberg™ depends upon and cannot survive without widespread public support and donations to carry out its mission of increasing the number of public domain and licensed works that can be freely distributed in machine-readable form accessible by the widest array of equipment including outdated equipment. Many small donations ($1 to $5,000) are particularly important to maintaining tax exempt status with the IRS.

The Foundation is committed to complying with the laws regulating charities and charitable donations in all 50 states of the United States. Compliance requirements are not uniform and it takes a considerable effort, much paperwork and many fees to meet and keep up with these requirements. We do not solicit donations in locations where we have not received written confirmation of compliance. To SEND DONATIONS or determine the status of compliance for any particular state visit www.gutenberg.org/donate.

While we cannot and do not solicit contributions from states where we have not met the solicitation requirements, we know of no prohibition against accepting unsolicited donations from donors in such states who approach us with offers to donate.

International donations are gratefully accepted, but we cannot make any statements concerning tax treatment of donations received from outside the United States. U.S. laws alone swamp our small staff.

Please check the Project Gutenberg web pages for current donation methods and addresses. Donations are accepted in a number of other ways including checks, online payments and credit card donations. To donate, please visit: www.gutenberg.org/donate.

Section 5. General Information About Project Gutenberg™ electronic works

Professor Michael S. Hart was the originator of the Project Gutenberg™ concept of a library of electronic works that could be freely shared with anyone. For forty years, he produced and distributed Project Gutenberg™ eBooks with only a loose network of volunteer support.

Project Gutenberg™ eBooks are often created from several printed editions, all of which are confirmed as not protected by copyright in the U.S. unless a copyright notice is included. Thus, we do not necessarily keep eBooks in compliance with any particular paper edition.

Most people start at our website which has the main PG search facility: www.gutenberg.org.

This website includes information about Project Gutenberg™, including how to make donations to the Project Gutenberg Literary Archive Foundation, how to help produce our new eBooks, and how to subscribe to our email newsletter to hear about new eBooks.

Table of Contents

- Edgings
- Tatted Motif and Edging #810
- Flower Edging #811
- Narrow Hairpin Lace Edging #812
- Crocheted Edging #813
- Tatted Round Motif and Edging #814

- Gray Place Mats with Rose Border and Napkins #816

- Green Place Mats and Napkins #817
- Gray and Yellow Hairpin Lace Edging #818
- Red & White Periwinkle Edging #819

- Lavender and Pink Edging with Knot Stitch Border #8110

- Green Handkerchief with White Rice Stitch Edging #8111

- Narrow Pink Edging #8112
- Pineapple Pillow Case Edging #8118
- Green Turkish Towel Edging #8117
- Guest Towel Edging #8116
- Fuchsia & White Hairpin Lace Edging #8113
- Motif Pillow Case Edging #8119
- Gray Towel Edging #8115
- Shaded Pink Edging #8114
- Crocheted Motif and Edging #815

- Handkerchief with White Rice Stitch Edging #8120

- Yellow Edging #8121

- Tinted Pink and Blue Corner and Edging #8122

- Transcriber’s Notes

- THE FULL PROJECT GUTENBERG LICENSE